Product introduction：

The thermal insulation board produced by our company is a new type of soft floating riser developed by the Research Institute of Forging and forging. Its high standard thermal insulation effect is highly praised by the major factories.

Products and processes are described as follows:

1. The weight of the hot plate is light: the proportion of the soft riser produced by our company is about 0.9t/ cubic. At present, the proportion of mouth sold in the market is about 1.3t/ m3, which reduces the cost of using the manufacturer's riser.

2. Thermal insulation and feeding effect is good because the production of thermal insulation board to add heating components, fiber cotton and other components, etc., the heating value after the lake is higher, so the ingot riser part of the cooling slow, the feeding of the product is better than the current market sales of hot plate. Thus, the utilization rate of raw materials is improved and the production cost of steel mirrors is reduced.

3. From the selection of raw materials on the last generation, strict quality control, mentioned that no lattice raw materials are not allowed to use. The use of high silica sand will be more than 9 years, so that it is not easy to adhere to the steel lock. Easy to clean, beautiful appearance.

4. Good drying and strength of insulation board: We use heat conduction oil boiler, the dried products are good dry, high strength, than other manufacturers use coal and water steam boiler in temperature and product quality has considerable advantages.

5. Reduce the difficulty of cleaning the riser: In the process of receiving the riser, the ash generated by the fiber combustion can isolate the riser and the ingot mold. Therefore, the appearance and smoothness of the riser are guaranteed.

Physical and chemical properties of composite fiber insulation board: